煤泥燃烧过程中汞的迁移行为研究

采用在线汞测试方法，以山西省低热值煤电厂中掺烧的煤泥为研究对象，利用实验室小型流化床，研究煤泥中汞的热转化行为差异及共性特征、影响煤泥热转化过程中汞迁移的关键因素，以揭示煤泥热转化过程中汞污染物的迁移机理。结果表明，同一种煤泥，相同气氛，800、900、1 000 ℃下，燃烧温度对煤泥中的汞的释放比例没有变化；相同温度，汞的释放比例为氮气>空气>氧气。3种煤泥在相同燃烧条件下，汞的释放特征相似，元素汞的释放量和释放比例差异较大。释放量与煤泥中的汞含量正相关，释放比例与煤泥中汞的赋存形态有一定关系。     

Image sequence-based risk behavior detection of power operation inspection personnel

A novel image sequence-based risk behavior detection method to achieve high-precision risk behavior detection for power maintenance personnel is proposed in this paper. In this method, the original image sequence data is first separated from the foreground and background. Then, the free anchor frame detection method is used in the foreground image to detect the personnel and correct their direction. Finally, human posture nodes are extracted from each frame of the image sequence, which are then used to identify the abnormal behavior of the human. Simulation experiment results demonstrate that the proposed algorithm has significant advantages in terms of the accuracy of human posture node detection and risk behavior identification.     

Effects of hydrogen plasma treatment on the physical and chemical properties of tin oxide thin films for ambipolar thin-film transistor applications

In this study, we investigated the physical and chemical properties of H₂ plasma-treated tin oxide (SnO_X) thin films, followed by their applications in ambipolar thin-film transistors (TFTs). Finely controlled H₂ implantation was carried out using a reactive-ion-etching system at a radio frequency power of 30 W and under various exposure times. H₂ plasma treatments induced changes in the chemical structures and surface morphologies of the SnO_X thin films, including a partial phase transformation of Sn and SnO to SnO₂. The defects originating from oxygen vacancies (O_Vacs) in the SnO_X thin films were passivated by H via the formation of Sn–H bonds, which decreased the density of subgap states in the SnO_X thin films. The H₂ plasma-treated SnO_X TFTs showed considerably improved ambipolarity and electrical performance. Complementary metal–oxide–semiconductor (CMOS) logic inverters comprising H₂-plasma-treated ambipolar SnO_X TFTs exhibited a maximum gain of 34.5 V/V at a supply voltage of 10 V. The results of this study present the meaningful investigation of H₂ plasma-treated ambipolar SnO_X TFTs that can be used to fabricate CMOS circuits for various applications.     

Molecular design for thermally stable SiZrBOC structure from single source precursor with high ceramic yield

A new type of high-temperature-resistant SiZrBOC ceramics was prepared by sol-gel method using polymethyl-hydro siloxane (PMHS), boric acid (B(OH)₃), and n-propyl zirconate (Zr(OPr)₄) as raw materials. After high-temperature pyrolysis, the SiZrBOC precursor was transformed into a crystalline ceramic material with a yield of 89.5 wt%. Fourier infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA) were applied to characterize the polymer-ceramic conversion process and thermal behavior of ceramic precursors. According to the results, the addition of boron elements led to the formation of Si-O-B links in the system. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to study the phase composition and microstructure of SiZrBOC ceramics. Finally, the oxidation test at 1200 °C revealed that SiZrBOC ceramics with a boron/zirconium molar ratio of 2.5:1 exhibited the best oxidation resistance at a weight gain of 0.4 wt% only.     

Meal patterns of weaned dairy calves are affected by previous dietary experience and associated with competition surrounding individual feed bins

The objective of this study was to evaluate how meal patterns of recently weaned and group-housed dairy calves are subject to effects of previous dietary experience and associated with competition for feed. During the preweaning period, Holstein heifer and bull calves were provided diets differing in provision and presentation of forage as follows: (1) pelleted starter only (n = 12), (2) starter and chopped coastal bermudagrass provided in separate buckets (n = 13), (3) starter and chopped coastal bermudagrass mixed together in the same bucket (n = 15), or (4) starter, chopped coastal bermudagrass, and liquid molasses mixed together in 1 bucket (n = 13). At 58 ± 2 (mean ± standard deviation) days of age, following weaning, calves were mingled between treatments and moved into group housing in weekly age-based cohorts (7 ± 2 calves/group; 8 groups total), and all were provided the mixed diet (without molasses). Within group pens, calves were fed individually using the Calan Broadbent feeding system (American Calan Inc.). Calves were monitored for 1 wk following introduction to the group pen. Feed intake was measured daily. Behavioral data, describing feeding times and competition for feed, were recorded continuously for 48 h beginning after a 5-d adaptation to the group pen. Calves previously provided starter only had longer, less frequent meals than calves previously provided forage in any form, and they tended to consume less feed compared with those previously provided starter and hay separately, with calves previously provided mixed diets having intermediate intakes. We observed occurrences of displacements at bins, which were followed by replacements and feed stealing on some occasions, where 34% of calves consumed feed from a bin assigned to another calf on at least 1 occurrence, and 64% of calves were stolen from at least once. Competition at feed bins was not affected by previous dietary treatments, but was associated with meal patterns. Actor displacement rate was negatively associated with meal frequency and duration, but calves that were displaced more often were those that spent more time feeding. These results suggested a possible carryover effect of previous exposure to forage on postweaning meal patterns following a dietary change. Further, we found that competitive behavior varied considerably between individuals, occurring frequently despite feeding calves using individually-assigned feeding bins, and was associated with meal characteristics. These results highlighted the importance of considering both previous dietary experience and social factors when evaluating feeding behavior.     

The structure,vacancy characteristics,and magnetic properties of GdMn1-xCrxO3 ceramics

To investigate the evolution of the structural and enhanced magnetic properties of GdMnO₃ systems induced by the substitution of Mn with Cr, polycrystalline GdMn_1-xCr_xO₃ samples were synthesized via solid-state reactions. XRD characterization shows that all GdMn_1-xCr_xO₃ compounds with single-phase structures crystallize well and that Cr³⁺ ions entering the lattice sites of GdMnO₃ induce structural distortion. SEM results indicate that the grain size of the synthesized samples (a few microns) decreases as the Cr substitution concentration increases. Positron annihilation lifetime spectroscopy reveals that vacancy-type defects occur in GdMn_1-xCr_xO₃ ceramics and that the vacancy size and concentration clearly change with the Cr content. The temperature and field dependence of the magnetization curves show that Cr substitution significantly influences the magnetic ordering of the gadolinium sublattice, improving the weak ferromagnetic transition temperature and magnetization of GdMn_1-xCr_xO₃. The enhanced magnetization of GdMn_1-xCr_xO₃ is closely related to the vacancy defect concentration.     

High energy storage and ultrafast discharge in NaNbO3-based lead-free dielectric capacitors via a relaxor strategy

Dielectric capacitors with decent energy storage and fast charge-discharge performances are essential in advanced pulsed power systems. In this study, novel ceramics (1-x)NaNbO₃-xBi(Ni_2/3Nb_1/3)O₃(xBNN, x = 0.05, 0.1, 0.15 and 0.20) with high energy storage capability, large power density and ultrafast discharge speed were designed and prepared. The impedance analysis proves that the introducing an appropriate amount of Bi(Ni_0·5Nb_0.5)O₃ boosts the insulation ability, thus obtaining a high breakdown strength (E_b) of 440 kV/cm in xBNN ceramics. A high energy storage density (W_total) of 4.09 J/cm³, recoverable energy storage density (W_rec) of 3.31 J/cm³, and efficiency (η) of 80.9% were attained in the 0.15BNN ceramics. Furthermore, frequency and temperature stability (fluctuations of W_rec ≤ 0.4% over 5–100 Hz and W_rec ≤ 12.3% over 20–120 °C) were also observed. The 0.15BNN ceramics exhibited a large power density (19 MW/cm³) and ultrafast discharge time (~37 ns) over the range of ambient temperature to 120 °C. These enhanced performances may be attributed to the improved breakdown strength and relaxor behavior through the incorporation of BNN. In conclusion, these findings indicate that 0.15BNN ceramics may serve as promising materials for pulsed power systems.     

Ion migration behavior and its interaction with sintering environment in cation conductor during flash sintering

Flash sintering has been reported in various ceramics. Nevertheless, anion and cation conductors exhibit different flash-sintering behaviors, and the interaction mechanism between the conductive species and the sintering environment has remained unclear. Herein, we report the flash-sintering phenomena of a typical cation conductor, Na₃Zr₂(SiO₄)₂(PO₄) with anode region surrounded by air and NaNO₃ environments. The results prove that the ionic behavior and joule heating distribution can be controlled by changing the electrode environment. Four possible scenarios describing the ion migration behavior and interaction with the environment are proposed for providing a guidance for controlling the ion interaction behavior during flash sintering.     

Interface regulation effects on mechanical behavior of heterostructure Ti6Al4V/TiAl-based laminated composite sheets

Design of architectured composites with layered-ordered structure can solve the strength-toughness mismatch problem of structural materials. In the present study, heterostructure Ti6Al4V/TiAl laminated composite sheets with different thicknesses of interface layer and TiAl composite layer were successfully produced by hot-pressing technology. The effects of interface regulation and laminated structure on their mechanical properties, crack propagation, and fracture behavior were studied. The results indicated that compressive strength of the sheets increased with the decrease in interface thickness. Compressive strength of TiAl composite sheet with thicker composite layer reached 1481.55 MPa at the arrester orientation with sintering holding time of 40 min, which was 25.96% higher than that of the sheet obtained at 120 min. Analysis indicated that the interface area transferred stress through slip bands and through-interface cracks. Compressive strength at the divider orientation reached 1443.06 MPa, which was 45.78% higher than that of the sheet obtained at 120 min. In this case, the interface area transferred stress through slip bands and along-interface cracks. For TiAl composite sheets with thinner composite layer, compressive strength was further improved to 1631.01 MPa and 1594.66 MPa at the arrester and divider orientations with sintering holding time of 40 min, respectively. The ductile metal layer exerted a significant toughening effect. Both interface regulation and laminated structure transformation could enhance the hetero-deformation induced (HDI) strengthening and improve the comprehensive mechanical properties of the composite sheets.     

Crushing behavior of alumina inclusions with different porosity during hot compression

Alumina inclusions in commercial as-cast 2.25Cr1Mo0.25V aluminum deoxidized steel exhibited a feature of porous structure. In order to investigate the crushing characteristics of alumina inclusion during hot working, a series of alumina blocks with different porosity whose properties are similar to the alumina inclusions in ingots were prepared using spark plasma sintering. The crushing behavior of alumina blocks during hot compression with quasi-static load was studied. A prediction model of compressive strength of alumina inclusions considering apparent porosity was established on basis of hyperbolic sine Arrhenius equation. A novel crushing mode diagram for alumina inclusions characterized by Z parameter was proposed. The crushing mechanism of alumina inclusions under different deformation parameters was clarified by fracture characteristics. The results showed that the hot compression process of alumina presented a typical brittle fracture, the compressive strength was more sensitive to deformation conditions at lower apparent porosity as compared with the conditions of higher apparent porosity. With the increase of Z, the crushing mode of alumina inclusions gradually changed from intergranular fracture to transgranular fracture.